*NEW FORMULA* Optimum Gloss-Coat is the most advanced polymer system that forms a layer of clear coat over the automotive finishes.
NOTE:A separate $5.00 fee is applied to any order containing LIQUID or CHEMICAL product. This fee is only administered once per order, so no matter how many LIQUID or CHEMICAL items are in an order, the $5.00 fee will only be applied once.
Domestic shipping is FREE for orders over $49, while a $6 flat-rate fee is applied for smaller orders. Any order containing LIQUID or CHEMICAL product will have a $5.00 flat-fee applied in addition to any shipping cost.
Cannot ship to: Andorra, Australia, Austria, Belgium, Brazil, Canada, China, Denmark, Egypt, Finland, France, Germany, Greece, Hong Kong, Iceland, India, Ireland, Israel, Italy, Japan, Korea, Republic of, Kuwait, Luxembourg, Malta, Mexico, Netherlands, New Zealand, Norway, Philippines, Poland, Portugal, Qatar, San Marino, Saudi Arabia, Serbia, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, United Arab Emirates, United Kingdom, Viet Nam
Every 20cc Gloss-Coat Syringe also comes with a FREE ButterSoft Suede Applicator Sample Kit!
Optimum Gloss-Coat provides better scratch and mar resistance, better UV resistance, better chemical etch resistance, and has better release properties than any other consumer product while providing unsurpassed gloss and slickness. Additionally, you can top Optimum Gloss-Coat with any non-abrasive wax or sealant of your choice to add additional gloss and slicknss.
1. Polish paint with Optimum Polish II or Optimum Hyper Polish to remove any defects. 2. Clean surface with 15% IPA solution to remove all polishing oils, waxes, and silicones. 3. Prime the applicator by making an X pattern across the pad. Only a few drops will be needed for each subsequent panel. 4. Wipe Optimum Gloss-Coat onto a single panel at a time in a thin layer using two directions, in a circular or front to back direction. 5. Within 5 minutes, inspect the panel with adequate lighting looking for any thick areas that have not flashed away to clear. 6. Use foam applicator or paint safe microfiber to even out any areas where you see streaks. This step is key, as any spots not leveled will have to be polished if allowed to cure. Panels will feel a bit tacky and will be self-leveling during cure time, so avoid any unnecessary touching, wiping, or contact to produce the best results. 7. Repeat steps 1-6 for each panel where application is desired.