The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

×
click to zoom in

Lake Country Manufacturing

LAKE COUNTRY FLEXIBLE BACKING PLATES FOR ROTARY POLISHERS

$12.95 - $19.95
SKU:
943-BACKING-PLATE

Business PRO-gram Member Price = BIG SAVINGS EVERYDAY!  FREE To Join & No Fees!

Lake Country Flexible Backing Plate for Rotary Polishers - 2-7/8 inch

5/8" thread for high speed rotary's like the Makita and the Dewalt. Velcro backing for hook and loop pads. 

  • Measures 73mm or 2 7/8 inches
  • We recommend pairing the 3-inch backing plate with 3-inch pads 

For rotary buffers we recommend using the Hook and Loop Backing Plates from Lake Country. The Grip Easy Molded Urethane provides a very sturdy yet slightly flexible backing for the pads to attach to. This allows you to work safely and get the most out of your detail when you exert good pressure on flat and curved areas. The hook and loop backing allows you to easily remove and attach virtually any pad to the surface. Simply screw the backing plate in and attach your favorite pad and you are ready to go. Better yet this backing plate comes in four great sizes, which allows you to use a variety of pad sizes while detailing! Check out the various sizes of this backing plate offered and the pad recommendations for each size below. If you are looking for a backing plate to pair with your rotary buffer, the Lake Country Rotary Backing Plate is for you!

Lake Country Flexible Backing Plate for Rotary Polishers - 4.75 inch

The Lake Country Flexible Backing Plate (43-175) measures 4.75-inches and works well with 6-inch and 6.5-inch pads. Fits all rotary buffers with 5/8" diameter shaft.

Lake Country Flexible, Molded Urethane, Backing Plates are the same backing plates being used by BMW, Mercedes and other German automakers in their assembly plants and are considered to be the finest backing plates available. 

Lake Country Flexible Backing Plate for Rotary Polishers - 6 inch

The Lake Country Flexible Backing Plate measures 6-inches. Fits all rotary buffers with 5/8-inch diameter shaft. 

  •  Measures 148mm or 5 3/4-inch
  •  We recommend pairing the 6-inch backing plate with 6.5-inch pads 

For rotary buffers we recommend using the Hook and Loop Backing Plates from Lake Country. The Grip Easy Molded Urethane provides a very sturdy yet slightly flexible backing for the pads to attach to. This allows you to work safely and get the most out of your detail when you exert good pressure on flat and curved areas. The hook and loop backing allows you to easily remove and attach virtually any pad to the surface. Simply screw the backing plate in and attach your favorite pad and you are ready to go. Better yet this backing plate comes in four great sizes, which allows you to use a variety of pad sizes while detailing! Check out the various sizes of this backing plate offered and the pad recommendations for each size below.

Lake Country Flexible, Molded Urethane, Backing Plates are the same backing plates being used by BMW, Mercedes and other German automakers in their assembly plants and are considered to be the finest backing plates available.

Advantages of Flexible, Urethane Backing Plates:

  • The VELCRO® brand fastening material is molded into the plate eliminating delamination.
  • The flexible edge reduces spontaneous heat build-up when transitioning from flat to contoured surfaces.
  • These plates are recommended for compounding, polishing and finishing "soft" German clear coats.
  • Vastly reduced heat transfer keeps motor heat from being transferred to the paint surface.
  • Flexible backing plate for circular polishers
  • Plated steel threaded insert will not cross-thread.
  • Reinforced inner construction uses steel struts molded into the center hub for superior strength.
  • Beveled outer edge allows easy pad removal and replacement.

Always use the recommended size backing plate for the sized pad you are using. Never use a backing plate that is larger than the foam pad or disc.

Care Instructions

Hide Reviews Show Reviews
Microfiber Care Instructions
  • Always wash new microfiber towels prior to first use.
  • Wash only with other non-linting materials (NO Cotton!) to maintain proper dirt-gripping properties.
  • Always wash newer black, orange, red, and other dark colored towels separately from lighter colored towels to mitigate the risk of dye bleeding.
  • Machine wash with mild liquid detergent (free of dyes, fragrances, bleach and softeners.)
  • Do NOT use chlorine bleach
  • Do NOT use any fabric softener as this clogs the microfibers and reduces performance.
  • Tumble dry using low heat.
  • Do NOT iron.

Customers Also Viewed

Need help? We're available at(208) 888-6821 - Email us atsupport@theragcompany.com
to top
The Rag Company BBB Business Review IDA Member Boise Metro Chamber of Commerce Buy Idaho