The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

×
click to zoom in

Lake Country Manufacturing

LAKE COUNTRY DUAL ACTION (DA) FLEXIBLE BACKING PLATES

$12.95 - $18.95
SKU:
9DA-DA-BACKING-PLATES

Business PRO-gram Member Price = BIG SAVINGS EVERYDAY!  FREE To Join & No Fees!

Lake Country Backing Plate for Orbital/Dual Action Polishers - 3 inch 

  • Measures 73mm or 2 7/8 inches
  • We recommend pairing the 3-inch backing plate with 3-inch pads

With traditional buffers you would have to screw in each pad with a wrench or deal with bonnets. This backing plate is designed to screw right into the Porter Cable 7424XP Random Orbital Buffer, Griot's Garage Random Orbital Polisher 6" 3rd Generation, Meguiar's Dual Action Polisher G110v2, etc. so you can easily swap out your favorite pads. After the backing plate is screwed on it stays firmly attached and the hook and loop pads lock in place. The backing plate is semi-flexible which allows you to work on curves and tough to reach areas. With firm and constant pressure you can breakdown each product and work them in to the surface properly. Now your polishes will give you a deeper shine and waxes will adhere to the paint longer. Check out the various sizes of this backing plate offered and the pad recommendations for each size below! The Dual-Action (DA) Backing Plate will save you time and effort as you achieve better detailing results!

Lake Country Flexible Backing Plate for Orbital/Dual Action Polishers - 5 inch

The Lake Country 5-inch velcro hook & loop backing plate is the perfect match with your Porter-Cable 7424XP, Griots Garage DA Polisher or Meguiar's MT-300 DA polisher. Use this backing plate with 5.5-inch to 6.5-inch pads. No need to change the counterweight either. This backing plate is large enough to stabilize the pad, but small enough to provide an adequate buffer zone between the edge of the foam pad and the molded urethan constructed backing plate.

Lake Country Flexible Backing Plate for Orbital/Dual Action Polishers - 6 inch

The Lake Country 6-inch DA Backing Plate works well with 7-inch and 7.5-inch pads. Fits all Orbital / DA polishers.

  • Measures 148mm or 5 3/4 inches
  • We recommend pairing the 6-inch backing plate with 6.5-inch pads

Lake Country Flexible, Molded Urethane, Backing Plates are the same backing plates being used by BMW, Mercedes and other German automakers in their assembly plants and are considered to be the finest backing plates available.

With traditional buffers you would have to screw in each pad with a wrench or deal with bonnets. This backing plate is designed to screw right into the Porter Cable 7424XP Random Orbital Buffer, Griot's Garage Random Orbital Polisher 6" 3rd Generation, Meguiar's Dual Action Polisher G110v2, etc. so you can easily swap out your favorite pads. After the backing plate is screwed on it stays firmly attached and the hook and loop pads lock in place. The backing plate is semi-flexible which allows you to work on curves and tough to reach areas. With firm and constant pressure you can breakdown each product and work them in to the surface properly. Now your polishes will give you a deeper shine and waxes will adhere to the paint longer. Check out the various sizes of this backing plate offered and the pad recommendations for each size below! The Dual-Action (DA) Backing Plate will save you time and effort as you achieve better detailing results!

Advantages of Flexible, Urethane Backing Plates:

  • The VELCRO® brand fastening material is molded into the plate eliminating delamination.
  • The flexible edge reduces spontaneous heat build-up when transitioning from flat to contoured surfaces.
  • These plates are recommended for compounding, polishing and finishing "soft" German clear coats.
  • Vastly reduced heat transfer keeps motor heat from being transferred to the paint surface.
  • Flexible backing plate for circular polishers
  • Plated steel threaded insert will not cross-thread.
  • Reinforced inner construction uses steel struts molded into the center hub for superior strength.
  • Beveled outer edge allows easy pad removal and replacement.

Always use the recommended size backing plate for the sized pad you are using. Never use a backing plate that is larger than the foam pad or disc

Care Instructions

Hide Reviews Show Reviews
Microfiber Care Instructions
  • Always wash new microfiber towels prior to first use.
  • Wash only with other non-linting materials (NO Cotton!) to maintain proper dirt-gripping properties.
  • Always wash newer black, orange, red, and other dark colored towels separately from lighter colored towels to mitigate the risk of dye bleeding.
  • Machine wash with mild liquid detergent (free of dyes, fragrances, bleach and softeners.)
  • Do NOT use chlorine bleach
  • Do NOT use any fabric softener as this clogs the microfibers and reduces performance.
  • Tumble dry using low heat.
  • Do NOT iron.

Customers Also Viewed

Need help? We're available at(208) 888-6821 - Email us atsupport@theragcompany.com
to top
The Rag Company BBB Business Review IDA Member Boise Metro Chamber of Commerce Buy Idaho